LASHING CAGE UNDER HOOK

• Loading Capacity for five (SWL = 750kg) or two (SWL = 300kg) persons with their complete working equipment.
• Size for five Persons: (2000x2400x2265mm).
• Size for two persons: (1000x1400x2350mm).
• The cage is sold including all lifting accessories according to UNE-EN 14502-1.
• The cage is equipped with a cover designed to resist to falling objects.
• Safety perimeter railing 1100mm high and interior handles for hands 100mm apart inward.
• Baseboard with side-protection guardrail around the perimeter of 500mm in height that prevents from falling objects.
• One level anti-slip floor with drainage points.
• The cage has a sefety cabinet anchored to the ceiling where the harnesses can be stored safely.
• The Lifeline systems may be anchored to any of the 5 security d-rings located in the center of the ceiling of the basket.
• The access door is opening inwards, it has closing spring hinges and locks automatically.
• Standard corrosion protection: blasting SA 2 ½, one coat of shopprimer and two final layers at customer choice RAL color.

Loading Capacity for five (SWL = 750kg) or two (SWL = 300kg) persons with their complete working equipment..

• Lateral wheels for movement and spacing when working in a vertical wall.
• The cage can be supplied fully closed with galvanized mesh to increase security.
• Lowered height to ease the transport inside a HC container.
• The cage can be demounted and can be used without the roof.
• Certified Lifelines and harnesses.
• The upper masterlinks can be supplied in different sizes to be adapted to the customer’s hook.
• Documentation delivered in any language.
• Final color and logos under customer requirements.

The lashing cage model BA-164G is according to its design for use in exceptional conditions, as specified in the RD 1215/1997 of 18 July , which regulates the minimum safety and health requirements for the its use by the personnel.

Its design also complies with the General Collective Agreement IV Construction Sector. BOE 17/07/2007 197 from Spain and with UNE EN 14502-1:2006 for the European Union.

This product should only be used in exceptional cases, as disposed in the RD 1215/1997.

The exceptional situation assumptions are:

• Technical impossibility to use equipment designed for lifting people.
• Hazards due to the working environment or to the need an auxiliar y devices for lifting people inside the machinery space, are greater than the ones that would result from the use of machinery for lifting loads, which is adapted for lifting people.
• Emergency situations, such as, evacuation of people, immediate repair to avoid serious and imminent dangers, etc.. In precaution of use in the above cases (except for emergency situations) the following procedure should be followed:
• Situation description and justification of it.
• Development of a specific work procedure for the each application.
• Definition and quantification of the human and material resources.
• Risk Assessment.
• Adoption of the most appropriate preventive and control measures.
• Estimate of the necessary preventive resources.